No. | Descripción | |
---|
1 | Abrazaderas para Shimadzu | |
2 | Abrazaderas para Thermo Scientific | |
3 | Accesorios para tubos de PEEK | |
4 | Agujas N10 | |
5 | Agujas N10, uso manual | |
6 | Agujas N25 | |
7 | Agujas N25, CTC | |
8 | Agujas N5 | |
9 | Agujas NLL | |
10 | Agujas NM1 / 2,5 | |
11 | Agujas para jeringas eVol® | |
12 | Agujas para válvulas de jeringa | |
13 | Capilar, sílice fundido | |
14 | Columnas capilares BP624 | |
15 | Columnas capilares BPX-Volatiles | |
16 | Columnas capilares BPX1-SIMD | |
17 | Columnas capilares BPX50 | |
18 | Columnas capilares GC BP1 | |
19 | Columnas capilares GC BP1 PONA | |
20 | Columnas capilares GC BP10 | |
21 | Columnas capilares GC BP20 | |
22 | Columnas capilares GC BP21 | |
23 | Columnas capilares GC BP5 | |
24 | Columnas capilares GC BP5MS | |
25 | Columnas capilares GC BPX-Dioxina | |
26 | Columnas capilares GC BPX35 | |
27 | Columnas capilares GC BPX5 | |
28 | Columnas capilares GC BPX608 | |
29 | Columnas capilares GC BPX70 | |
30 | Columnas capilares GC BPX90 | |
31 | Columnas capilares GC CYDEX-B™ | |
32 | Columnas capilares GC SolGel-1ms™ | |
33 | Columnas capilares HT5 | |
34 | Columnas capilares HT8 / Fast PCB | |
35 | Columnas capilares SolGel-Wax | |
36 | Filtros de gas | |
37 | Filtros de gas, trampa grande | |
38 | Férulas para Perkin-Elmer CG | |
39 | Jeringas manuales de microlitros | |
40 | Jeringas manuales de microlitros, émbolo guiado | |
41 | Jeringas para el automuestreador Agilent CG | |
42 | Jeringas para el automuestreador Agilent CG, hermético al gas | |
43 | Jeringas para el automuestreador CG de CTC / Thermo / Bruker (Varian) | |
44 | Jeringas para el automuestreador CG de CTC / Thermo AS3000, AS2000, AS200/80 | |
45 | Jeringas para el automuestreador CG de CTC / Thermo TriPlus | |
46 | Jeringas para el automuestreador CG de CTC / Thermo, hermética al gas | |
47 | Jeringas para el automuestreador CG de Shimadzu | |
48 | Jeringas para el inyector automático de CG de CTC | |
49 | Jeringas para el inyector automático de LC de CTC | |
50 | Jeringas para inyector automático de CG Perkin-Elmer | |
51 | Jeringas para inyector automático de CG Perkin-Elmer, hermético al gas | |
52 | Juntas tóricas CRS ONE, FKM | |
53 | Kit de muestreo de gases y vapores | |
54 | Liner de entrada y juntas tóricas para el CG Agilent | |
55 | Liner de inyección para Perkin Elmer CG | |
56 | Liner de inyección para Shimadzu C | |
57 | Liner de inyección para Thermo GC | |
58 | Revestimiento de entrada para Bruker (Varian) | |
59 | Revestimiento de entrada SGE OptChem™, cónico | |
60 | Revestimiento de entrada SGE OptChem™, cónico FocusLiner®. | |
61 | Revestimiento de entrada SGE OptChem™, cónico, con frita de vidrio. | |
62 | Revestimiento de entrada SGE OptChem™, ConnecTite | |
63 | Revestimiento de entrada SGE OptChem™, ConnecTite, con orificio superior. | |
64 | Revestimiento de entrada SGE OptChem™, ConnecTite, con orificio inferior. | |
65 | Revestimiento de entrada SGE OptChem™, doble cono | |
66 | Revestimiento de entrada SGE OptChem™, FocusLiner®. | |
67 | Revestimiento de entrada SGE OptChem™, recto | |
68 | Septums para Agilent GC | |
69 | Tubo, PEEK, 100F | |
70 | Tubo, PEEK, 10F | |
71 | Tubo, PEEK, 50F | |
72 | Tubo, PEEK, 5F | |
73 | [EN]: 1/16" Hole (Extended) Stainless Steel pack of 5 | |
74 | [EN]: 10 µL Fixed Needle CTC/Thermo (Classic Button) Syringe with 8 cm 0.47 mm OD Cone Tipped Needle | |
75 | [EN]: 10 µL Fixed Needle CTC/Thermo (Classic Button) Syringe with 5 cm 0.47 mm OD Cone Tipped Needle pack of 6 | |
76 | [EN]: 10 µL Removable Needle Syringe with Flexible Plunger,5 cm 0.47 mm OD Bevel Tipped Needle pack of 6 | |
77 | [EN]: 250 µL Removable Needle Syringe with 5.1 cm 0,72mm OD LC Needle | |
78 | [EN]: 4.2 cm 0.47/0.63 mm OD Dual Gauge Cone Tipped Needle for 10 µL Agilent Syringes pack of 2 | |
79 | [EN]: AG Column Nuts Deep Well pack of 2 | |
80 | [EN]: Agilent inlet base seals, pack of 2 | |
81 | [EN]: ATAS Inlet Liner FocusLiner length 81mm | |
82 | [EN]: Bevel Tipped Needles for 25-500 µl syringes 18 cm 0.63 mm OD, pack of 2 | |
83 | [EN]: Big Trap gas filter 1/4" - Hydrocarbon | |
84 | [EN]: Big Trap gas filter 1/4" - Moisture | |
85 | [EN]: Big Trap gas filter 1/4" - Oxygen | |
86 | [EN]: Big Trap gas filter 1/4" - Universal | |
87 | [EN]: Big Trap gas filter 1/8" - Hydrocarbon | |
88 | [EN]: Big Trap gas filter 1/8" - Moisture | |
89 | [EN]: Big Trap gas filter 1/8" - Oxygen | |
90 | [EN]: Bin MEPS-C18 for XCHANGE / eVol® pack of 5 | |
91 | [EN]: Bulkhead Union 1/16"x1/16" tubing size OD, stainless steel | |
92 | [EN]: Capillary 2m x 170µm/110µm | |
93 | [EN]: Capillary column connector MVSU-004 stainless steel Mini Union | |
94 | [EN]: Capillary column connector MVSU-005 stainless steel Mini Union | |
95 | [EN]: Cleaning kit NCK needle | |
96 | [EN]: CO2 Compression spring pack of 10 | |
97 | [EN]: Cone Tipped Needle 4.2 cm 0.63 mm OD for 5 µL Agilent Syringes pack of 2 | |
98 | [EN]: Deactivated Fused Silica Tubing 430 µm OD x 320 µm ID x 2 mLength | |
99 | [EN]: Deactivated quartz glass 363 µm OD x 150 µm ID per meter as a continuous length | |
100 | [EN]: Deans Switch Kit (includes 1.1 mm OD Tubing) | |
101 | [EN]: Desactivated Silica Capillary tubing ID 0,32 mm, length 25m | |
102 | [EN]: Desactivated Silica Kapillare ID 0,32 mm | |
103 | [EN]: DIAMOND MS syringe 10R-GT-MS1 10 µl | |
104 | [EN]: Dosierspritze 100F-LL-GT gasdichte Spritze, 100 µl | |
105 | [EN]: Dosing syringe 100F-LLX-GT gastight syringe, 100 µl | |
106 | [EN]: Double end ferrules peek Pack of 10 | |
107 | [EN]: EasyLok Fitting, 2 Fittings & 2 Ferrules | |
108 | [EN]: Edelstahlrohr ID 0,5 mm AD 0,75 mm | |
109 | [EN]: eVol® Charger | |
110 | [EN]: eVol® Charging Stand | |
111 | [EN]: eVol® replacement battery | |
112 | [EN]: eVol® Syringe 1 ml pack of 3 | |
113 | [EN]: eVol® Syringe 100µl for MEPS | |
114 | [EN]: eVol® Syringe 100µl pack of 3 | |
115 | [EN]: eVol® Syringe 100µl with GT Plunger 5 cm 0.5 mm OD bevel tipped needle | |
116 | [EN]: eVol® Syringe 100µl without needle | |
117 | [EN]: eVol® Syringe 1ml | |
118 | [EN]: eVol® Syringe 500µl | |
119 | [EN]: eVol® Syringe 500µl for MEPS | |
120 | [EN]: eVol® Syringe 500µl pack of 3 | |
121 | [EN]: eVol® Syringe 500µl without needle | |
122 | [EN]: eVol® Syringe 50µl | |
123 | [EN]: eVol® syringe 50µl pack of 3 | |
124 | [EN]: eVol® Syringe 50µl without needle | |
125 | [EN]: eVol® syringe 5µl pack of 3 | |
126 | [EN]: eVol® Syringe 5µl with GT Plunger & 5 cm 0.5 mm OD Bevel Tipped Needle | |
127 | [EN]: eVol® Syringe 5µl without needle | |
128 | [EN]: Ferrule-15% Graphite/85% Vespel-with 0.4 mm Hole, for Shimadzu QP5000-Ii & QP5050 Standard MS Interface, pack of 10 | |
129 | [EN]: Ferrules SHIM 17A pack of 10 | |
130 | [EN]: Fixed Needle 1mL CTC Head Space Syringe with Energized GT Plunger & 5.6 cm 0.63 mm OD Side Hole Needle | |
131 | [EN]: Fixed needle CTC RTC & Thermo RSH syringe 10 µl 5.7 cm, 0.47 mm OD cone tipped needle | |
132 | [EN]: Fixed needle CTC RTC & Thermo RSH syringe 10 µl 5.7 cm, 0.63 mm OD cone tipped needle | |
133 | [EN]: Fixed Needle CTC Syringe 25 µL with GT Plunger & 5 cm 0.47 mm OD Cone Tipped Needle | |
134 | [EN]: Fused Silica Capillary Tube 0.03 x 0.36 x 1000 mm | |
135 | [EN]: Fused Silica Capillary Tube 0.05 x 0.36 x 1000 mm | |
136 | [EN]: Fused Silica Capillary Tube 0.075 x 0.36 x 1000 mm | |
137 | [EN]: Fused silica tube 285µm OD x 25µm ID x 2m length | |
138 | [EN]: fused silica tubing 190 µm OD x 75 µm ID x 10 m | |
139 | [EN]: Fused Silica Tubing, undeactivated 363 µm OD x 25 µm ID per meter as a continuous length | |
140 | [EN]: Gas filter - Hydrocarbon | |
141 | [EN]: Gas tight syringe 1MF-LT-GT 1 ml | |
142 | [EN]: Gas tight syringe 1MR-VLL-GT 1 ml | |
143 | [EN]: Gas-tight syringe 25µl, with GT plunger and 5cm long needle 0.5mm OD, with bevelled tip | |
144 | [EN]: Gas-tight syringes 250R-GT 250 µl, removable needle | |
145 | [EN]: Gas-tight syringes 250R-V-GT 250 µl removable needle | |
146 | [EN]: Gas-tight syringes, 1MDF-GT, 1ml | |
147 | [EN]: Gas-tight syringes, 1MDF-LL-GT, 1 ml - 100 ml | |
148 | [EN]: Gas-tight syringes, 1MR-GT 1 ml, removable needle | |
149 | [EN]: Gas-tight syringes, 2.5MDF-LL-GT, 2.5 ml | |
150 | [EN]: Gas-tight syringes, 500F-GT, 500 µl, fixed needle | |
151 | [EN]: Gasdichte Spritze 1MR-V-GT mit montiertem Ventil, 1 ml | |
152 | [EN]: gasdichte Spritze 250F-GT 250 µl, feste Nadel | |
153 | [EN]: Gasdichte Spritze 500R-V-GT mit montiertem Ventil, 500µm | |
154 | [EN]: Graphite ferrule GFF-505-050 pack of 10 | |
155 | [EN]: Graphite ferrules OGF VAR 1078 pack of 10 | |
156 | [EN]: Graphite ferrules OGF4-060 pack of 10 | |
157 | [EN]: Graphite Ferrules with 0.5 mm hole for use with 1/8" Nuts on PerkinElmer Injectors & Detectors, pack of 10 | |
158 | [EN]: Graphite Sealing Ring with 8 mm Hole for Thermo 8000 and Trace GCs, pack of 10 | |
159 | [EN]: Graphite Vespel® Ferrule with 0.4 mm hole pack of 10 | |
160 | [EN]: Graphite Vespel® ferrules with 0.3/0.4 mm hole pack of 10 | |
161 | [EN]: Graphite Vespel® Sealing Rings 1/16" pack of 10 | |
162 | [EN]: HPLC-Spritze 5BR-5, 5 µl | |
163 | [EN]: Hülsen MOGF-005 Graph PKT 10 für Gaschromat, VE=10 | |
164 | [EN]: Inlet Liners Gooseneck 2 mm ID length 78.5 mm pack of 5 | |
165 | [EN]: Inlet Liners Straight 1.2 mm ID Length 78.5 mm pack of 5 | |
166 | [EN]: Inlet Liners with Quartz Wool 2 mm ID Straight, Length 78.5 mm pack of 5 | |
167 | [EN]: Jumbo Syringe MAR-LL-GT 1000 ml, Luer Lock | |
168 | [EN]: Jumbo Syringe MAR-LL-GT 2000 ml, Luer Lock | |
169 | [EN]: Jumbo Syringe MAR-LL-GT 500 ml, Luer Lock | |
170 | [EN]: Liner AG 4 mm ID DBLTAP | |
171 | [EN]: Liner AG 4 mm ID FOCUS | |
172 | [EN]: Liner AG 4 mm ID pack of 25 | |
173 | [EN]: Liner AG 4 mm ID QW | |
174 | [EN]: Liner AG 4 mm ID STRGT | |
175 | [EN]: Liner AG 4 mm ID TAPER | |
176 | [EN]: Liner AG 4 mm ID TAPER QW | |
177 | [EN]: Liner AG 4 mm ID TAPFOCUS | |
178 | [EN]: Liner PE PSS pack of 5 | |
179 | [EN]: Liner SH14 3.4mm ID Taper, Pkt of 5 | |
180 | [EN]: Liner SH2010 3.4mm ID FOC | |
181 | [EN]: Liner TQ (for 70mm Needle) 5 mm ID Split Focus, pack of 5 | |
182 | [EN]: Manual Decapper 11mm | |
183 | [EN]: MEPS Syringe 100 µL removable needle agilent, GT Plunger | |
184 | [EN]: MEPS-C18-AG 23GA BIN pack of 5 | |
185 | [EN]: MEPS-C18-C/T 23GA BIN pack of 5 | |
186 | [EN]: MEPS-C18-CTC 23GA BIN pack of 5 | |
187 | [EN]: MEPS-Development Kit-C/T 23GA BIN pack of 5 | |
188 | [EN]: MEPS-M1-CTC 22GA BIN pack of 5 | |
189 | [EN]: MEPS-SAX-CTC 22GA BIN pack of 5 | |
190 | [EN]: MEPS-SCX-CTC 22GA BIN pack of 5 | |
191 | [EN]: MEPS-SIL-C/T 23GA BIN pack of 5 | |
192 | [EN]: Metal syringe 5F-GP 5µl | |
193 | [EN]: Methyl desaktivierte Kapillare 2VSD/025 0,025 i.D. | |
194 | [EN]: Methyl desaktivierte Kapillare 2VSD/050 0,050 i.D. | |
195 | [EN]: Methyl desaktiviertes Fusedsilika Kapillarrohr Länge: 10 m, ID: 0,530 mm | |
196 | [EN]: microliter syringe 10 µL Fixed Needle CTC RTC & Thermo RSH Syringe with 8.5 cm 0.47 mm OD Cone Tipped Needle | |
197 | [EN]: Microliter syringe 100F 100 µl, incl. calibration certificate | |
198 | [EN]: Microliter syringe 100F-CTC-GT-5 100 µl, 0.47 mm OD Cone Tipped Needle with calibration | |
199 | [EN]: Microliter syringe 100F-CTC-GT-5 100 µl, 0.47 mm OD Cone Tipped Needle | |
200 | [EN]: Microliter syringe 10F-RT-/RSH-GT-5,7/0,47 10 µl | |