Entradas 1 a 358. Total de 358 entradas encontradas.
Pantalla  símbolosoff entradas:10203050100 columnas:12
 Descripción 
Accesorios para mechero Bunsen / Usbeck 
Aros de soporte / Usbeck 
Bandejas, acero inoxidable / Usbeck 
Base, flexible, cinc colado a presión / Usbeck 
Blowpipe / Usbeck 
 Bomba de chorro de agua, niquelada / Usbeck 
Bomba de chorro de agua, niquelada / Usbeck 
Cartucho de gas / Usbeck 
Conjunto de mortero y mano de mortero, de acero fino inoxidable / Usbeck 
Cork borer sharpener / Usbeck 
Cortadores de tubos de vidrio / Usbeck 
Crisoles de hierro / Usbeck 
Crisoles de plomo / Usbeck 
Cucharas para fósforo / Usbeck 
Cucharas para sodio / Usbeck 
Cuchillo para corte de vidrio / Usbeck 
Encendedor de gas / Usbeck 
Lötrohrkohle / Usbeck 
Mechero Bunsen / Usbeck 
Mechero Bunsen / Usbeck 
Mechero Bunsen / Usbeck 
Mechero Bunsen con palanca / Usbeck 
 Mechero Bunsen con regulación de aire / Usbeck 
Mechero Bunsen con válvula de aguja / Usbeck 
Mechero de alcohol / Usbeck 
Mechero Teclu / Usbeck 
Mechero Teclu con válvula de aguja / Usbeck 
Mechero Teclu con válvula de aguja / Usbeck 
Mechero Teclu con válvula de aguja / Usbeck 
Medidor en forma de espátula / Usbeck 
Micropinzas, cinc colado a presión / Usbeck 
Nuez cuadrada / Usbeck 
Nuez de gancho / Usbeck 
Nuez doble / Usbeck 
Nuez doble / Usbeck 
Nuez doble, acero fino inoxidable / Usbeck 
 Pinza de mesa con tornillos articulados, aleación de aluminio, con recubrimiento de polvo / Usbeck 
Pinza de pesar / Usbeck 
Pinza de refrigerante / Usbeck 
Pinza de tres dedos / Usbeck 
Pinza flexible con nuez doble en cruz, zinc colado bajo presión / Usbeck 
Pinza soporte / Usbeck 
Pinza universal / Usbeck 
Pinzas de cadena / Usbeck 
Pinzas de Mohr / Usbeck 
Pinzas de soporte / Usbeck 
Pinzas para buretas / Usbeck 
Pinzas para buretas / Usbeck 
Pinzas para mesa, aluminio, revestidas de polvo / Usbeck 
Placa de protección para laboratorio de cerámica de vidrio / Usbeck 
Placas soporte / Usbeck 
Placas soporte / Usbeck 
Soporte para botellas de gas a presión / Usbeck 
Soporte trípode / Usbeck 
Soporte trípode / Usbeck 
Soporte trípode / Usbeck 
Square Quadrupod with glass ceramic plate / Usbeck 
Taladrador de corcho / Usbeck 
Teclu burners with needle valve / Usbeck 
Triángulos / Usbeck 
Tubing Connection for Teclu burners with thread connection / Usbeck 
Válvula de salida / Usbeck 
 [EN]: ***after clearance sale no longer availabe*** / Usbeck 
 [EN]: ***after clearance sale no longer availabe*** / Usbeck 
 [EN]: ***after clearance sale no longer availabe*** Rings,steel,w/o.bosshead,diam.160 mm / Usbeck 
 [EN]: ***after clearance sale no longer available*** Forceps 100 mm, curved nickel plated brass / Usbeck 
 [EN]: ***see item 6290283*** Stainless instrument tray 300x200x15 / Usbeck 
 [EN]: a / Usbeck 
 [EN]: Abdampfschale 160 mm, hohe Form 18/8-Stahl / Usbeck 
 [EN]: Abtropfwanne 310x125x30 mm aus Edelstahl, 18/8 autoklavierbar / Usbeck 
 [EN]: Abtropfwanne 440x270x27 mm aus Edelstahl, 18/8 autoklavierbar / Usbeck 
 [EN]: Apothekerlöffel rostfrei 150 mm / Usbeck 
 [EN]: ball grip, black for burner 1246/1 / Usbeck 
 [EN]: Basin conical, cap. 100 ml dia. 80 mm, height 35 mm, stainless steel / Usbeck 
 [EN]: Basin conical, cap. 200 ml dia. 100 mm, height 50 mm, stainless steel, pack of 2 / Usbeck 
 [EN]: Basin conical, cap. 300 ml dia. 105 mm, height 65 mm, stainless steel / Usbeck 
 [EN]: Beaker tongs, plastic coated, clamping range 40-100 mm, length 250 mm / Usbeck 
 [EN]: Becher 30 ml, Edelstahl 18/8 graduiert, Ø 51 mm, Höhe 35 mm / Usbeck 
 [EN]: Bin 400 ml 121 mm dia., h 53 mm / Usbeck 
 [EN]: Bosshead 16 mm, die-cast with MS T-screws M8 ***costum made product*** / Usbeck 
 [EN]: Bossheads, 40 mm, 2620 / Usbeck 
 [EN]: Bossheads, 60 mm, 2630 / Usbeck 
 [EN]: bowl 18/8 stainless steel 2000ml conical, high shape diam. 217 mm, height 115 mm / Usbeck 
 [EN]: Box with cap 18/8 Stahl Ø 120 mm, 1200 ml / Usbeck 
 [EN]: Box with cap 18/8 Stahl Ø 150 mm, 1600 ml / Usbeck 
 [EN]: Box with cap 18/8 Stahl Ø 200 mm, 3000 ml / Usbeck 
 [EN]: Box with cap 18/8 Stahl Ø 60 mm , 170 ml / Usbeck 
 [EN]: Brenner-Rohr 14x1x100 mm für Teclubrenner 9.018 293 / Usbeck 
 [EN]: Brenneraufsatz, Messing vernickelt für Kopfdurchmesser 17 mm / Usbeck 
 [EN]: Brush 18 mm diam. 18g / Usbeck 
 [EN]: Brush, diameter 25 mm, 13 g / Usbeck 
 [EN]: Bucket 15000ml, Ø330mm height 310mm, conical, graduated, stainless steel / Usbeck 
 [EN]: Bürste 90 mm Durchmesser 56 g / Usbeck 
 [EN]: Bunsen burner for bottle gas air regulation and needle valve / Usbeck 
 [EN]: Bunsen burner for city gas 8mbar DG prooved (DK) / Usbeck 
 [EN]: Bunsen burner for natural gas / Usbeck 
 [EN]: Bunsen burner for natural gas air regulation and needle valve / Usbeck 
 [EN]: Bunsen burner for natural gas, air regulation, double lever valve, pilot flame inside, DIN version / Usbeck 
 [EN]: Bunsen burner for propane gas / Usbeck 
 [EN]: Bunsen burner for propane with air regulation, lever valve, pilot flame inside, DIN version / Usbeck 
 [EN]: Bunsen burners propane DG prooved (DK) / Usbeck 
 [EN]: Bunsen burners,air regulation,needle valve and pilot flame,natural gas DG-prooved (DK) / Usbeck 
 [EN]: Bunsen burners,air regulation,needle valve and pilot flame,propane gas DG prooved (DK) / Usbeck 
 [EN]: Bunsenbrenner für Erdgas DG-geprüft (DK) / Usbeck 
 [EN]: Bunsenbrenner für Erdgas mit Luftregulierung, Hebelhahn, Sparflamme innen, DIN-Ausführung / Usbeck 
 [EN]: Bunsenbrenner für Propan Luftregulierung, Doppelhebelhahn, Sparflamme innen, DIN-Ausführung / Usbeck 
 [EN]: Bunsenbrenner nach IEC 332 Teil 2= UL 94, Erdgas (auch Methan) ***Sonderanfertigung*** / Usbeck 
 [EN]: Burner for adjustment, bottlegas DIN 50051 Part 1 costum made product / Usbeck 
 [EN]: Burners propane / Usbeck 
 [EN]: Chain clamps, 100-170 mm / Usbeck 
 [EN]: Clamp 10-25mm vinyl coated jaws / Usbeck 
 [EN]: Clamp 13-40mm vinyl coated jaws, nickel plated / Usbeck 
 [EN]: Clamp 26-60mm vinyl coated jaws, nickel plated / Usbeck 
 [EN]: Clamp with Hook, 12 mm 90 mm long / Usbeck 
 [EN]: Clamps,die-cast zinc,w/o.bosshead,angled jaws range 40 mm / Usbeck 
 [EN]: Clamps,die-cast zinc,w/o.bosshead,angled jaws range 60 mm / Usbeck 
 [EN]: Clay triangle 70 mm / Usbeck 
 [EN]: Cock toggle / Usbeck 
 [EN]: Cork borer 10,00 mm, single nickel-plated brass / Usbeck 
 [EN]: Cork borer 11,25 mm, single nickel-plated brass / Usbeck 
 [EN]: Cork borer 26,25 mm, single / Usbeck 
 [EN]: Cork borer 8,25 mm, single nickel-plated brass / Usbeck 
 [EN]: Cork borers, 5.00 mm, separately / Usbeck 
 [EN]: Cork borers, 7.50 mm, separately / Usbeck 
 [EN]: Cork drill / Usbeck 
[EN]: Cork knife,with plastic handle / Usbeck 
 [EN]: Cork pads 34 x 27.5 mm / Usbeck 
 [EN]: Cork ring 140x90mm 60 gr. for pistons of 500-1000ml / Usbeck 
 [EN]: costum made product / Usbeck 
 [EN]: costum made product / Usbeck 
 [EN]: Cover f.stainless steel crucibles 40mm / Usbeck 
 [EN]: Cover for bucket 15000ml / Usbeck 
 [EN]: Cross bosshead 16 mm swivelling zinc diecasting, nickel plated / Usbeck 
 [EN]: Crucible 18/8-steel 40x40mm / Usbeck 
 [EN]: Crucible 18/8-steel 45x40mm / Usbeck 
 [EN]: Crucible 18/8-steel 50x45mm / Usbeck 
 [EN]: Crucible 18/8-steel 60x50mm / Usbeck 
 [EN]: Crucible lid 50 mm Iron / Usbeck 
 [EN]: Crucible lid made of iron Ø 45mm / Usbeck 
 [EN]: Crucible tong 200 mm, with bow stainless steel / Usbeck 
 [EN]: Crucible tong 220 mm, with bow stainless steel / Usbeck 
 [EN]: Crucible tong 250 mm, with bow stainless steel / Usbeck 
 [EN]: Crucible tong 300 mm, with bow stainless steel / Usbeck 
 [EN]: Crucible tong 400 mm, with bow stainless steel / Usbeck 
 [EN]: Crucible tong 500 mm, with bow stainless steel / Usbeck 
 [EN]: Diamond pencil, 140 mm, ball pen shape / Usbeck 
 [EN]: Diamond pencil, 140 mm, wooden handle, 15 g / Usbeck 
 [EN]: Dissecting needles 140mm lancet-shaped / Usbeck 
 [EN]: Dissecting needles with plastic handle length 140mm, straight / Usbeck 
 [EN]: Doppellöffel, 300 mm # 3356 / Usbeck 
 [EN]: Doppelmuffe Aluminium 13 mm / Usbeck 
 [EN]: Doppelmuffe Aluminium T-Schrauben für Stäbe bis 13 mm / Usbeck 
 [EN]: Doppelmuffe Zinkdruckguss 16 mm Schrauben Messing vern. / Usbeck 
 [EN]: Doppelmuffe, Spannweite 16,5 mm Aluminium-Legierung / Usbeck 
 [EN]: Doppelspatel, 150mm / Usbeck 
 [EN]: Doppelspatel, 210mm 18/8-Stahl, poliert / Usbeck 
 [EN]: Doppelspatel, flexibel Edelstahl 18/8 / Usbeck 
 [EN]: Doppelspatel, flexibel Edelstahl 18/8, Länge 130mm / Usbeck 
 [EN]: Doppelspatel, flexibel Edelstahl 18/8, Länge 150mm / Usbeck 
 [EN]: Double Spoon, 210 mm stainless steel 18/8, round handle / Usbeck 
 [EN]: Drahtgewebe 160 x 160 mm Stahl, verzinkt / Usbeck 
 [EN]: Draining bowl 560x200x27mm stainless steel, detachable grid / Usbeck 
 [EN]: Dreifuß 12 x 26cm, Edelstahl / Usbeck 
 [EN]: Dreifuß Ø 140 mm, Edelstahl Höhe 220 mm / Usbeck 
 [EN]: Einfachmuffe 16 mm pulverbeschichtet / Usbeck 
 [EN]: Einfachmuffe 16 mm vernickelt / Usbeck 
 [EN]: Eisentiegel 48 x 36 mm / Usbeck 
 [EN]: Ejector for Cork borer / Usbeck 
 [EN]: Ersatzdocht 1 m / Usbeck 
 [EN]: Evaporating bin 400 ml 150x26 mm, stainless steel / Usbeck 
 [EN]: Evaporating bin 80 mm, high form 18/8-steel / Usbeck 
 [EN]: Fine adjustment valve 10 x 1 mm Sonderanfertigung / Usbeck 
 [EN]: Flaschenverschluß / Usbeck 
 [EN]: Flaschenverschluß / Usbeck 
 [EN]: Flaschenverschluß NS 14 / Usbeck 
 [EN]: Flask tongs 17-60mm 220mm length steel no. 4130 / Usbeck 
 [EN]: Flask tongs 45-70mm 300mm length stainless steel / Usbeck 
 [EN]: Flex clamp with thread M 10 three fingers, jaw width 0-40mm / Usbeck 
 [EN]: Flex clamp with thread M10 jaw width 12-25mm / Usbeck 
 [EN]: Forcep 105 mm, straight, fine points nickel plated steel / Usbeck 
 [EN]: Forcep 115 mm, straight, fine points nickel plated steel / Usbeck 
 [EN]: Forcep 115 mm, straight, fine points stainless steel / Usbeck 
 [EN]: Forcep 130 mm, straight, fine points nickel plated steel / Usbeck 
 [EN]: Forcep 145 mm, straight, fine points stainless steel / Usbeck 
 [EN]: Forcep for cover glass 105 mm curved, nickel plated steel / Usbeck 
 [EN]: Forcep for cover glass 105 mm curved, stainless steel / Usbeck 
 [EN]: Forcep for cover glasse 105 mm straight, nickel plated steel / Usbeck 
 [EN]: Forceps 105 mm, curved fine points, nickel plated steel / Usbeck 
 [EN]: Forceps 115mm blunt/curved stainless steel / Usbeck 
 [EN]: Forceps 130 mm, curved, blunt points, stainless steel / Usbeck 
 [EN]: Forceps 145 mm, curved, fine point / Usbeck 
 [EN]: Funnel OD 120mm, stainless steel, air duct, handle, ID 110mm, height 140mm / Usbeck 
 [EN]: Funnel OD 150mm, stainless steel, air duct, handle, ID 140mm, height 170mm / Usbeck 
 [EN]: Gas lighter / Usbeck 
 [EN]: Gas safety hose DIN 1000mm bulk goods / Usbeck 
 [EN]: Gas safety tubing 10x2 mm, 750mm / Usbeck 
 [EN]: Gas safety tubing 1500 mm for gas burners acc.to DIN 30665, up to 100mbar / Usbeck 
 [EN]: Gas safety tubing DIN 1000 mm / Usbeck 
 [EN]: Gauze 200 x 200 mm galvanized steel / Usbeck 
 [EN]: General purpose scissors 170 mm / Usbeck 
 [EN]: Gurtklemme für Gefäße d=60 - 170 mm # 2825 / Usbeck 
 [EN]: Haltegurt für Gurtklemme 2825 / Usbeck 
 [EN]: Hand cork drill 25 mm / Usbeck 
 [EN]: Handle for glass cutter -w/o blade- / Usbeck 
 [EN]: High temperature burner for cartridge, Piezo ignition, needle valve, T 1550°C / Usbeck 
 [EN]: Hook connector range 13 mm, steel, grey powdercoated steel, nickel plated brass screw with plastic handle / Usbeck 
 [EN]: Hufeisenmagnet 5391 / Usbeck 
 [EN]: Instrument bin 135x230x55mm stainless steel, with handle lid / Usbeck 
 [EN]: Instrument bin 215x315x60mm stainless steel, with handle lid / Usbeck 
 [EN]: instrument tray 340x210x60mm stainless steel / Usbeck 
 [EN]: instrument tray 360x260x50mm stainless steel / Usbeck 
 [EN]: Instument tray 240x160x40mm stainless steel / Usbeck 
 [EN]: Iron crucibles, 60 x 50 mm / Usbeck 
 [EN]: Korkbohrer 6,25 mm, einzeln / Usbeck 
 [EN]: Korkbohrer Gr.7, einzeln / Usbeck 
 [EN]: Korkbohrer Gr.8, einzeln / Usbeck 
 [EN]: Laboratory jack 130 x 160 mm / Usbeck 
 [EN]: Laboratory jack 300 x 300 mm rubber feet / Usbeck 
 [EN]: Laboratory jacks 120 x 140 mm stainless steel / Usbeck 
 [EN]: Laboratory jacks 18/8 steel 200x200mm, 7 kg / Usbeck 
 [EN]: Lead crucible 40 x 44mm with cover / Usbeck 
 [EN]: Leveling Screw M8 for tripod plate 2012 / Usbeck 
 [EN]: Lid Ø 60 mm for melting crucibles / Usbeck 
 [EN]: Lift 75 x 80 mm DIN 12897, stainless steel plates, stable design, rubber feet / Usbeck 
 [EN]: Machine cork borer 24 mm ***costum made product*** / Usbeck 
 [EN]: Mekerbrenner für Allgas Luftregulierung, Nadelventil für Gaswahl von unten / Usbeck 
 [EN]: Mekerbrenner für Erdgas Lufregulierung, Nadelventil Rohr Ø 28 mm, Kopf Ø 32 mm / Usbeck 
 [EN]: Micro double spatula 100mm blade width 3mm, stainless steel, flexible / Usbeck 
 [EN]: Micro double spatula 130mm blade width 3mm, stainless steel, flexible / Usbeck 
 [EN]: Micro double spatula 185mm blade width 6mm, stainless steel, flexible / Usbeck 
 [EN]: Micro spatula spoon 150 mm stainless steel, rigid / Usbeck 
 [EN]: Micro spatula spoon 210 mm / Usbeck 
 [EN]: Mikro bunsen burner for bottle gas air regulation, needle valve / Usbeck 
 [EN]: Mikro bunsen burner, natural gas air regulation, needle valve / Usbeck 
 [EN]: Mikrodoppelspatel 185 x 3 mm / Usbeck 
 [EN]: Mikroskopierschere 105 mm / Usbeck 
 [EN]: Muffe mit Haken # 2250 / Usbeck 
 [EN]: Nadel, gebogen / Usbeck 
 [EN]: Nadelhalter Kolle 240 mm KST Griff / Usbeck 
 [EN]: Nadelhalter n.Kolle 125 mm / Usbeck 
 [EN]: Nadeln lanzettform / Usbeck 
 [EN]: Nadelventil 710114 Sechskantnippel 714030 Dichtung 68703, kompl.Satz / Usbeck 
 [EN]: Natriumsieblöffel, doppelt / Usbeck 
 [EN]: Needle 50 mm stainless steel / Usbeck 
 [EN]: Oese, Stahldraht, 50 mm lang 1,5 mm Durchmesser / Usbeck 
 [EN]: Oese, Stahldraht, 50 mm lang 2,5 mm Durchmesser / Usbeck 
 [EN]: Pinzette 115 mm, gebogen spitz, Edelstahl 18/8 / Usbeck 
 [EN]: Pinzette 115 mm, gebogen spitz, Stahl vernickelt / Usbeck 
 [EN]: Pinzette 145 mm, gebogen/stumpf Edelstahl 18/8 / Usbeck 
 [EN]: Pinzette 160 mm, gebogen spitz, Edelstahl 18/8 / Usbeck 
 [EN]: Plastic foot 10x22mm for support plate no.9.224 003 / Usbeck 
 [EN]: Plastic foot for support plate no.9.224 015 / Usbeck 
 [EN]: powder spatula 18/8 steel 185 mm / Usbeck 
 [EN]: Pulverspatel 210 x 9 mm 18/8 / Usbeck 
 [EN]: Pulverspatel, Edelstahl 18/8 150 mm / Usbeck 
 [EN]: Reagenglashalter Metall / Usbeck 
 [EN]: Regulation-disc with thread M10x1 / Usbeck 
 [EN]: Repalcement belt for bottle holder / Usbeck 
 [EN]: Replacement screw for double bossheads 16mm / Usbeck 
 [EN]: Retort Stand Base, 545 g for rods up to 13 mm / Usbeck 
 [EN]: Rezepturschere 18/8 Länge: 170 mm / Usbeck 
 [EN]: Rod 450 mm, without thread Ø 12 mm 18/8 stainless steel / Usbeck 
 [EN]: Rod stainless steel without thread, 750 mm threaded M 10 / Usbeck 
 [EN]: Safety burner gas tap, propane ignition fuse thermocouple air regulation / Usbeck 
 [EN]: Safety closure for bottles up to 250ml / Usbeck 
 [EN]: Sandbadschale Neu:Edelstahl 100 mm / Usbeck 
 [EN]: Schere 18/8 Länge: 230 mm / Usbeck 
 [EN]: Schlauchsicherung 5-12 mm / Usbeck 
 [EN]: Schlauchsicherung bis 17 mm mit Schraube / Usbeck 
 [EN]: Schlauchsicherung bis 21 mm mit Schraube / Usbeck 
 [EN]: Schlossschraube M 6x45 mm / Usbeck 
 [EN]: Schlossschraube M 6x62 mm / Usbeck 
[EN]: Scoops,steel,with wooden handle / Usbeck 
 [EN]: Seal ring for spiritus burner / Usbeck 
 [EN]: Spare parts kit for clamps const. of spring 68603, coach bolt 68515, washer 69020 and wing nut 69031 / Usbeck 
 [EN]: Spatellöffel 150 mm Edelstahl 18/8 / Usbeck 
 [EN]: Spatellöffel 150 mm Edelstahl 18/8, flacher Löffel / Usbeck 
 [EN]: Spatellöffel 150 mm, 18/8 steif, breit / Usbeck 
 [EN]: Spatellöffel 210 mm, 18/8 steif, breit / Usbeck 
 [EN]: Spatelmesser / Usbeck 
 [EN]: Spatula Spoon 120mm, 18/8 rigid, broad / Usbeck 
 [EN]: Spatula spoon 210 mm B 30 mm / Usbeck 
 [EN]: Stativdreifuß, RAL 7032, kieselgrau Gewinde M 10, Schenkellänge 115 mm ***Sonderanfertigung*** / Usbeck 
 [EN]: Stativfuß Duplex 150 mm Schenkellänge pulverbeschichtet, nivellierbar für Stäbe bis 16 mm / Usbeck 
 [EN]: Stativfuß Duplex 185 mm Schenkellänge pulverbeschichtet, nivellierbar für Stäbe bis 16 mm / Usbeck 
 [EN]: Stativklemme 30-80mm / Usbeck 
 [EN]: Stativklemme mit Muffe Zinkdruckguss pulverbeschichtet, Korkeinlage, 12-25mm Spannweite / Usbeck 
 [EN]: Stativklemme mit Muffe Zinkdruckguss pulverbeschichtet, Korkeinlage, 20-40mm Spannweite / Usbeck 
 [EN]: Stativring 100 mm, mit Muffe pulverbeschichtet / Usbeck 
 [EN]: Stativring 100 mm, mit Muffe Stahl, verzinkt / Usbeck 
 [EN]: Stativring 100 mm, ohne Muffe Stahl, verzinkt D-AxD-I 116x100 mm / Usbeck 
 [EN]: Stativring 130 mm, mit Muffe Stahl, verzinkt / Usbeck 
 [EN]: Stativring 130 mm, ohne Muffe Stahl, verzinkt / Usbeck 
 [EN]: Stativring 60 mm, mit Muffe pulverbeschichtet / Usbeck 
 [EN]: Stativring 80 mm, mit Muffe pulverbeschichtet / Usbeck 
 [EN]: Stativstab 1250 mm ohne Gewinde Ø 12 mm, 18/8 Edelstahl / Usbeck 
 [EN]: Steinless steel mortar 190 mm o.-Ø 1000 ml, with pestle, heavy achievement / Usbeck 
 [EN]: Support bar with thread M10, 350 x 12 mm, 18/8 costum made product / Usbeck 
 [EN]: Support clamps 30-60 mm die-cast zinc / Usbeck 
 [EN]: Support rings without bosshead steel galvanizes 86/70mmØ / Usbeck 
 [EN]: Support rod 1000 mm without thread, Ø 12 mm, 18/8 stainess steel / Usbeck 
 [EN]: Support rod 1250 mm with thread M 10 Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rod 1500 mm without thread Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rod 200x12 18/8 Stahl, w/o thread ***costum made product*** / Usbeck 
 [EN]: Support rod 500 mm without thread Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rod 900x12 18/8 steel, w/o thread ***costum made product*** / Usbeck 
 [EN]: Support rods 1000 mm, with thread M 10, Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rods 250 mm, without thread, Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rods 250x12 mm with thread M 10, 18/8 steel / Usbeck 
 [EN]: Support rods 450 mm, with thread M 10, Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rods 450 mm, with thread M 10, Ø 12 mm, steel, galvanised / Usbeck 
 [EN]: Support rods 500 mm, with thread M 10, Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rods 600 mm, with thread M 10, Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Support rods 750 mm, with thread M 10, Ø 12 mm, 18/8 stainless steel / Usbeck 
 [EN]: Teclu burner for all gas with needle valve and air regulator / Usbeck 
 [EN]: Teclu burner for bottle gas with needle valve and air regulator tube Ø 19 mm, burnerhead Ø 32 mm / Usbeck 
 [EN]: Teclu burner for natural gas with needle valve and air regulator tube Ø 19 mm, burnerhead Ø 32 mm / Usbeck 
 [EN]: Teclu burner for natural gas with needle valve and air regulator tube Ø 19 mm, burnerhead Ø 32 mm / Usbeck 
 [EN]: Teclu burners for natural gas with needle valve and low flame / Usbeck 
 [EN]: Teclu burners for natural gas, air regulation, lever tap, pilot flame inside, adjustable / Usbeck 
 [EN]: Teclu burners for natural gas, with needle valve and air control / Usbeck 
 [EN]: Teclu burners for propane, air regulation / Usbeck 
 [EN]: Teclu burners for propane, air regulation, double lever cock, pilot flame inside, DIN version, DIN 30665 / Usbeck 
 [EN]: Teclu burners,air regulation and needle valve propane gas / Usbeck 
 [EN]: Teclubrenner für Erdgas Lufregulierung, Doppel-Hebelhahn Sparflamme innen, DIN-Ausführung / Usbeck 
 [EN]: Teclubrenner für Erdgas Lufregulierung, Gashahn Sparflamme innen, verstellbar / Usbeck 
 [EN]: Teclubrenner für Erdgas Luftregulierung / Usbeck 
 [EN]: Teclubrenner für Propan Lufregulierung, Gashahn Sparflamme innen / Usbeck 
 [EN]: Teclubrenner für Propan Lufregulierung, Hebelhahn Sparflamme innen / Usbeck 
 [EN]: Test burner according to DIN 75200 natural gas incl. screw connection / Usbeck 
 [EN]: Test burner according to DIN 75200 propane incl. screw connection / Usbeck 
 [EN]: test tube racks / Usbeck 
 [EN]: Testbrenner nach ASTM D 5025 für Erdgas, Länge: 100mm +/- 10 mm Durchmesser: 9,5 mm +/- 0,3 / Usbeck 
 [EN]: Tiegeldeckel aus Eisen / Usbeck 
 [EN]: Tischklemme f. Stäbe bis 13 mm jedoch m.Umlenkung M 6 x 31 mm ***Sonderanfertigung*** / Usbeck 
 [EN]: Tonnenfuß 1135 g, Spannweite=13mm / Usbeck 
 [EN]: Tripod 12 x 21 cm, stainless steel / Usbeck 
 [EN]: Tripod 12 x 25cm, stainless steel / Usbeck 
 [EN]: Tripod ring ID: 70mm, Ø 8mm, with socket galvanized steel / Usbeck 
 [EN]: Tripod, stainless steel Height 230 mm / Usbeck 
 [EN]: Tube protection 10 - 16 mm stainless steel / Usbeck 
 [EN]: Tubenzange # 4160 / Usbeck 
 [EN]: Tubing protection 12 - 22 mm / Usbeck 
 [EN]: Tweezers 130mm straight/butt, steel electroplated / Usbeck 
 [EN]: Tweezers 130mm, curved/blunt steel nickelplated / Usbeck 
 [EN]: Tweezers 145 mm, blunt/straight steel electroplated / Usbeck 
 [EN]: Tweezers 145mm, curved/blunt steel nickelplated / Usbeck 
 [EN]: Universal clamp swivelling 180° zinc diecasting, powder-coated, cork inlay, bearing 0 - 80 mm / Usbeck 
 [EN]: Universalmuffe Aluminium / Usbeck 
 [EN]: vacuum gauge / Usbeck 
 [EN]: Verbandsschere 18/8 spitz/stumpf 130 mm lang / Usbeck 
 [EN]: Vibrationsspatel 185 mm Edelstahl 18/8 mit Kunststoffgriff / Usbeck 
 [EN]: Water jet pump nickel plated brass non-return valve / Usbeck 
 [EN]: Weighing scoop, 100mm width 30mm, stainless steel / Usbeck 
 [EN]: Weighing scoop, 120mm width 30mm, stainless steel / Usbeck 
 [EN]: Weighing Scoop, 40 g, stainless steel length 200 mm, width of scoop 30 mm / Usbeck 
 [EN]: Weighing scoops / Usbeck 
 [EN]: Weighing scoops / Usbeck