No. | Descripción | |
---|
1 | Film de plástico, rollos | |
2 | Folienschweißgeräte polystar® | |
3 | Generador de impulsos polystar® 120 GE | |
4 | Sellador por pulsos pulsos polystar ® 120 GE | |
5 | Termoselladoras polystar® 243 | |
6 | Termoselladoras polystar® 423 M / 583 | |
7 | [EN]: Adapter for tweezers 150-250mm | |
8 | [EN]: Adapter for tweezers 300-600mm | |
9 | [EN]: Cellular rubber profile | |
10 | [EN]: Cords with eyelets | |
11 | [EN]: Cover plate above | |
12 | [EN]: Cover plate below | |
13 | [EN]: Cutting device cpl. for polystar® 423: from # 01180 and polystar® 583: from # 00448 | |
14 | [EN]: Cutting device, manual | |
15 | [EN]: Decorit button green | |
16 | [EN]: DS heat sealing tong polystar® 300 DS for joint length up to 300 mm w/o ermitter | |
17 | [EN]: Ersatzheizband 15 D, 15 cm | |
18 | [EN]: Ersatzheizband 20 D, 20 cm | |
19 | [EN]: Ersatzheizband 40 D, 42 cm für 100 GE | |
20 | [EN]: Film dispenser for 1 roll of tubular film | |
21 | [EN]: Fix table for bag welding for polystar® 243, 243 M | |
22 | [EN]: Fix table for bag welding for polystar® 401 M, 413 M | |
23 | [EN]: Fix table for bag welding for polystar® 423, 423 M | |
24 | [EN]: Fix table for bag welding for polystar® 583, 583 M | |
25 | [EN]: Flow welding equipment polystar® 400/6,7 DSM 6.7m/min., up to ca.400g w/o. support, overlap min.50mm, wave embossment | |
26 | [EN]: Flow welding equipment polystar® 981 DSM 8.5m/min., stainless steel, wave embossment 15mm | |
27 | [EN]: Foam profile 423 M | |
28 | [EN]: Foil crawling unit for 1 roll for polystar® 243, 243 M | |
29 | [EN]: Foil crawling unit for 1 roll for polystar® 423, 423 M, 401 M, 413 M | |
30 | [EN]: Foil crawling unit for 1 roll for polystar® 583, 583 M, 601 M, 613 M | |
31 | [EN]: Foil roll magazine polystar® 510 for rolls up to 500mm width, without cutting device | |
32 | [EN]: Heating element 423 + 423 M | |
33 | [EN]: Heating element 60 D, 60 cm | |
34 | [EN]: Heating element top (T-rail) | |
35 | [EN]: Heating element, bottom | |
36 | [EN]: Heating element, top | |
37 | [EN]: Heizdraht komplett für Polystar 244/245 | |
38 | [EN]: Impulse heat sealing tong Polystar 20 D for seam length up to 200 mm, without impulse generator (nur für polystar&re | |
39 | [EN]: Impulse heat sealing tong Polystar 40 D for seam length up to 400 mm, without impulse generator (nur für polystar&re | |
40 | [EN]: Impulse heat sealing tong Polystar 400 D for seam length up to 400 mm, | |
41 | [EN]: Impulse heat sealing tong Polystar 60 D for seam length up to 600 mm, without impulse generator (nur für polystar&re | |
42 | [EN]: Impulse heat sealing tong polystar® 150 D for seam length up to 150 mm | |
43 | [EN]: Impulse heat sealing tong polystar® 600 D for seam length up to 600 mm, without impulse generator | |
44 | [EN]: Insertion tabs mounted on the right OR left ***specify when ordering*** | |
45 | [EN]: Knife Holder for polystar® 401 M + 601 M | |
46 | [EN]: Knife holder for polystar® 423: from # 01180 and polystar® 583: from # 00448 | |
47 | [EN]: Magnetic welding unit polystar® 418 M-RPA with 400 mm working width, 4-digit, 230V/50Hz, max 12 different. foil thick | |
48 | [EN]: Magnetschweißgerät polystar® 401 HM mit 400 mm Arbeitsbreite | |
49 | [EN]: Plastic film 500x0,05 mm tubular, transparent in rolls of 500 m | |
50 | [EN]: Plug-on table for flat bag sealing | |
51 | [EN]: Plug-on table for flat bag welding V2A | |
52 | [EN]: polystar® extension cable with coupler and plug, 6 m long | |
53 | [EN]: polystar® pallet truck for 401 HM + 601 HM | |
54 | [EN]: polystar® silicon paste tube of 90 g | |
55 | [EN]: Pressure cord with eyelets | |
56 | [EN]: Pressure switch | |
57 | [EN]: PTFE tape 40 x 0,08 mm | |
58 | [EN]: PTFE tape, 1 mtr. | |
59 | [EN]: PTFE tape, 960 x 16 x 0,16 mm | |
60 | [EN]: Schneidvorrichtung für polystar® 401 M handbetätigt | |
61 | [EN]: Schneidvorrichtung für polystar® 601 M handbetätigt | |
62 | [EN]: SFZ beak shaped collet polystar® 300 SFZ for joint length up to 300 mm | |
63 | [EN]: SFZ beak shaped collet polystar® 400 SFZ for joint length up to 400 mm w/o ermitter | |
64 | [EN]: Silicone rubber profile 423 M | |
65 | [EN]: Silikongummiprofil R 4-238 285 mm, für Polystar 245 | |
66 | [EN]: Spare blades, polystar® 401 M + 601 M | |
67 | [EN]: Spare heating tapes, 30 D, 30 cm | |
68 | [EN]: Sterilisationsrolle 100mm autoklavierbar Rolle a'200 mtr. | |
69 | [EN]: Sterilisationsrolle 150mm Rolle a'200 mtr. | |
70 | [EN]: Sterilisationsrolle 75mm autoklavierbar Rolle a'200 mtr. | |
71 | [EN]: Sterilization rolls, 250 mm, autoclavable, roll of 200 mtr. | |
72 | [EN]: Sterilization rolls, 300 mm, autoclavable, roll of 200 mtr. | |
73 | [EN]: T-rail | |
74 | [EN]: Table welding unit polystar® 583 M w. electronic welding and cooling time automatics | |
75 | [EN]: Table welding unit polystar® 601 HM-DN working width 600mm | |
76 | [EN]: Table-top sealing device polystar® 250 MV with 250 mm working width Sealing seam width 8 mm, GS tested | |
77 | [EN]: Tubular film 300 x 0.10 mm PE, colorless, transparent Roll of 250 mtr. | |