Entradas 1 a 39. Total de 39 entradas encontradas.
No. | Descripción | |
---|
1 | [EN]: Active coal filter for EK1000-3000 388x288x268mm, perforated plate, blue coated | |
2 | [EN]: Adapter internal dia. 125mm / Ø 75mm | |
3 | [EN]: Aluminium extension profile 1100 mm | |
4 | [EN]: Connection pipe DN160 | |
5 | [EN]: console set | |
6 | [EN]: Extraction Arm FX2-ORIG-D75-L1100-Up-Low | |
7 | [EN]: Fan assembly CMV EX 160 Motor DN 160mm, 400V, 0.5KW | |
8 | [EN]: Fan N3 with thyristor controller steel sheet, white blue coated, fan wheel aluminium, IP21, 230V | |
9 | [EN]: Fan starter FMS 1.0-1.6A | |
10 | [EN]: Filter cartridge for EK 1000-3000 | |
11 | [EN]: FilterCart Original Plus suction unit 230V, 2mtr. arm | |
12 | [EN]: HEPA Filter H14 for FilterCart | |
13 | [EN]: Hood kit metal hood lacquered | |
14 | [EN]: MFS replacement filter basic, MFS/WallCart replacement filter basic, replacement filter cartridge cellulose filter | |
15 | [EN]: Mounting KIT HEPA for FilterCart | |
16 | [EN]: Multi-use hood 260x335mm for FX-Arm 50/75/100 | |
17 | [EN]: Multi-use hood CHEM,small, 340x260mm for FX-Arm CHEM Ø50 / Ø75 | |
18 | [EN]: Multi-use hood f. FX-Arm | |
19 | [EN]: Multi-use hood f. FX-Arm-ESD | |
20 | [EN]: Noise protection hood f.N3 fan + filter steel plate powder coated | |
21 | [EN]: Pipe connection FX2 Ø100/125mm | |
22 | [EN]: Reducer DN160 to DN100 | |
23 | [EN]: Speed controller individually | |
24 | [EN]: Suction arm FX, Ø 100mm, L=2400mm aluminium, joints PP, incl. extraction hood, temp.range: -10...+70°C | |
25 | [EN]: Suction arm FX, Ø 50mm, L=1500mm connection on top, swivel range 360°, -for further connection a reduction is | |
26 | [EN]: Suction arm FX, Ø 75mm, L=1100mm | |
27 | [EN]: Suction arm FX, Ø 75mm, L=1100mm connection below, ca. 110-240m3/h, -10...70°C | |
28 | [EN]: Suction arm FX2 ESD/EX, Ø 100mm, L=1200mm connection top / bottom | |
29 | [EN]: Suction kit EK 2000 EUR filter element with HEPA particle filter | |
30 | [EN]: Suction kit EK 2500 EUR filter element with HEPA particle filter 75 m³/h, 240 V | |
31 | [EN]: Suction kit EK 500 EUR filter element with HEPA particle filter | |
32 | [EN]: Table clamp for FX-arms steel, galvanized | |
33 | [EN]: Tube Ø100mm, grey length 3m | |
34 | [EN]: Tubing Ø100mm, black length 3m, for ESD/EX | |
35 | [EN]: Tubing Ø75mm, grey length 3m | |
36 | [EN]: Wall console for FX 2 flat, L=190, white | |
37 | [EN]: Wall console for FX Arm 32 standard, ESD | |
38 | [EN]: Wall-/Ceiling console + Alu profile 250mm | |
39 | [EN]: Wall/ceiling bracket aluminium | |