No. | Descripción | |
---|
1 | Aro soporte | |
2 | Mechero Bunsen | |
3 | Mechero Bunsen | |
4 | Nuez de gancho | |
5 | Nuez multiuso de metal ligero especial | |
6 | Nuez, hierro maleable | |
7 | Pie adherente para mechero de laboratorio Juchheim | |
8 | Pinza de tres puntas, fundición maleable | |
9 | Pinza para buretas, latón | |
10 | Pinzas para buretas | |
11 | Pinzas para buretas, acero | |
12 | Pinzas para buretas, latón | |
13 | Pinzas soporte, fundición maleable | |
14 | Placas soporte, acero | |
15 | Plataforma de elevación con accionamiento hidráulico, acero inoxidable | |
16 | Plataforma elevadora eléctrica | |
17 | Plataformas de elevación de laboratorio, metal ligero | |
18 | Plataformas elevadoras hidráulicas, modelo pesado | |
19 | Triángulos | |
20 | [EN]: ***no longer available*** ***replacement MC: VL 00522 P*** | |
21 | [EN]: Ablaßventil gerader Abl.M24x1,5/NS19 mit Kegelsitz und Knebel | |
22 | [EN]: Ablaßventil seitl.Abl.M24x1,5/NS19 | |
23 | [EN]: Burner "Meker-Fisher" for all gas | |
24 | [EN]: Clamp 18/8-stainless steel roundedn jaws, opening to 60mm, with cork jaws | |
25 | [EN]: Clamp 18/8-stainless steel, rounded jaws, opening to 25mm, with cork jaws | |
26 | [EN]: Clamp 18/8-stainless steel, roundedn jaws, opening to 40mm, with cork jaws | |
27 | [EN]: Clamp, steel powder coated, rounded jaws, opening to 60mm, with cork jaws | |
28 | [EN]: Cover plate | |
29 | [EN]: Cross bosshead 16 mm malleable cast iron | |
30 | [EN]: Dichtung 30x24 mm, PTFE | |
31 | [EN]: Dichtung 34x28x1, PTFE | |
32 | [EN]: Doppelmuffe 30 mm Spannweite mit vernickelten Schrauben M10 | |
33 | [EN]: Double bosshead to DIN 12895, 16mm malleable iron, powder coated, M8 safety heart screw, VA | |
34 | [EN]: Double bosshead to DIN 12895, 16mm, malleable iron, powder coated, M8 brass nickelplated thumb screws | |
35 | [EN]: Double cardan coupling 6 x 6 mm from VA, strong device | |
36 | [EN]: Double cardan coupling D8 from VA, strong device with Nut and 15 mm round hole | |
37 | [EN]: Double cardan shaft coupling 8 x 8 mm made of stainless steel 1.4571 max. power transmission 35Nm | |
38 | [EN]: Fire protection tub (tub and comb off stainless steel) 450x450x120mm | |
39 | [EN]: Four foot, 135 x 135 mm made of stainless steel | |
40 | [EN]: Laboratory lifting platform, 300 x 300 mm | |
41 | [EN]: Leaf stirrer for NS29, 1 ltr. | |
42 | [EN]: Leaf stirrer for NS29, 250 ml | |
43 | [EN]: Leaf stirrer for NS29, 500 ml | |
44 | [EN]: Luviskol grease 100 ml | |
45 | [EN]: Manometer -1...15 bar | |
46 | [EN]: Marlothermöl SH, 5 Ltr. | |
47 | [EN]: NS Einschraubstutzen mit NS 14,5 | |
48 | [EN]: NS Einschraubstutzen mit NS 14,5 | |
49 | [EN]: NS Einschraubstutzen mit NS 29 | |
50 | [EN]: O-Ring aus FKM Ø 15x4 für Druckrührverschluß | |
51 | [EN]: O-ring, 10x5, FKM | |
52 | [EN]: paddle mixer for NS 45, 4l | |
53 | [EN]: Plumb crucible wi.lid | |
54 | [EN]: Pressure stirr closure DBP | |
55 | [EN]: Process and program controller JU-07-C-2-4 | |
56 | [EN]: Pt100 EL145, for 1 + 2 ltr. with closed pocket | |
57 | [EN]: Ring with bosshead, O.D.:160mm ring of steel with bosshead of malleable, powder coated | |
58 | [EN]: Rührverschluß NS 29 | |
59 | [EN]: Rührverschluß NS 45 | |
60 | [EN]: Rührwelle 312 aus 1.4571 | |
61 | [EN]: Sealing for centrum 40x34mm | |
62 | [EN]: Sealing for lid 157x149x2, from klinger cord | |
63 | [EN]: Sealing from klinger cord 34x24mm | |
64 | [EN]: Square bushing 16 mm range malleable iron, with socket screw | |
65 | [EN]: Square socket, with square head screws, malleable iron, 13 mm | |
66 | [EN]: Stand base 100 x 175 mm steel, powder coated, M10 bore hole, 8mm thick, with welded feet | |
67 | [EN]: Stand base 210x130mm, gray, steel, powder coated, with heart flange | |
68 | [EN]: Stand clamp made of steel 18/8 2 rounded jaws, opening to 80mm, with cork jaws | |
69 | [EN]: Stand clamp made of steel epoxy coated, 2 rounded jaws, opening to 80mm, with cork jaws | |
70 | [EN]: Stativklemme aus Stahl bis 40 mm Spannweite, grün | |
71 | [EN]: Stativstab 750 x 12 mm rostfreier Stahl, mit Gewinde M 10 | |
72 | [EN]: Stirrer stump from basic material no. 1.4571 for 2 Ltr. vacuum cauldron | |
73 | [EN]: Support ring w/o bosshead annealed cast iron, Ø 50mm | |
74 | [EN]: Support rod 1000 x 15 mm stainless steel, with thread M 10 | |
75 | [EN]: Support rod 1250 x 15 mm stainless steel, with thread M 10 | |
76 | [EN]: Support rods 1000 x 12 mm, stainless steel, with thread M 10 | |
77 | [EN]: Thermometerklemme Temperguss 2-16 mm | |
78 | [EN]: Tripod 115 mm leg length cast iron | |
79 | [EN]: Tripod 150x ID 80mm stainless steel | |
80 | [EN]: Tripod rod, stainless steel, with thread M 10, Length 600, Ø 10 mm | |
81 | [EN]: Tripod, ring Ø 120mm adjustable height, stainless steel | |
82 | [EN]: Universal clamp aluminium alloy with cork jaws, opening to 80mm | |
83 | [EN]: Vulkolandichtung für NS 29 25 x 17 mm | |
84 | [EN]: Water-jet pumpe simple construction | |